（1）

Recommended wood: Hardwood of choice, 1/2"—3/8”(13—19mm) thick, 8 1/2”(21.6cm) square

Recommended drill bits: 3/64”"(1.2mm) & 1/16" ( 1.6mm) or #56 ( 1.2mm) & #52 ( 1.6mm)

Recommended blades: #5 reverse skip-tooth or reverse tooth

Notes/special instructions: Be careful not to waver when cutting the straight lines. A steady hand is needed.

Recommended finishing: Danish oill or oil of choice.

（2）

Recommended wood: Hardwood of choice, 1/2”—3/8”(13-19mm) thick, 8 1/2”(21.6cm) square

Recommended drill bits: 3/64"( 1.2mm)& 1/16" ( 1.6mm) or #56 ( 1.2mm) &#52 ( 1.6mm)

Recommended blades: #5 reverse skip-tooth or reverse tooth

Notes/special instructions: A steady hand is required when cutting circles.

Recommended finishing: Danish oil or oil of choice.